S25FL128P

128 Megabit CMOS 3.0 Volt Flash Memory
with 104 MHz SPI (Serial Peripheral Interface) Bus

The S25FL128P is a 3.0 Volt (2.7 V to 3.6 V), single-power-supply Flash memory device. The device consists of 64 sectors of 256 KB memory, or 256 sectors of 64 KB memory. The device accepts data written to SI (Serial Input) and outputs data on SO (Serial Output). The devices are designed to be programmed in-system with the standard system 3.0 volt VCC supply. The memory can be programmed 1 to 256 bytes at a time, using the Page Program command. The device supports Sector Erase and Bulk Erase commands. Each device requires only a 3.0 volt power supply (2.7 V to 3.6 V) for both read and write functions. Internally generated and regulated voltages are provided for the program operations. This device requires a high voltage supply to WP#/ACC pin for the Accelerated Programming mode.

Specifications

Device Architecture
Density	128Mb
Voltage	3 Volts
Interface	Serial
Process Technology	90 nm MirrorBit™ technology
Bus Width	x1
Sector Type	Uniform
Basic Ordering Options
Package Options	16-pin SO 8-contact WSON
Temperature Range	-40°C to +85°C

Data Sheets

Downloads	Document code	Last updated
s25fl128p_00_04_e.pdf	s25fl128p_00_04_e	Jul. 02, 2007

Simulation Models

SOMA	IBIS	VHDL & Verilog-HDL
	s25fl128p_wson_8x6.zip s25fl128p_soic-16.zip	S25fl128p00m.zip S25fl128p01m.zip